White/Red Duplicating Silicone

White/Red Duplicating Silicone

Description

Shore A hardness 20 

A two component, addition curing, low viscosity silicone designed for taking very fast impressions. It is ideally suited to and is the product for fast set moulds where a free flowing productis required.

Typical Applications:

Most small moulding applications

Physical Properties

Typical cured properties 

Colour:Red / white
Specific Gravity:1.10
Hardness (Shore A):20, after 60 minutes
Tensile Strength (N/mm²):3.5
Elongation at Break %:400
Tear Strength (N/mm):4.5
Shrinkageless than 0.1%

Handling Properties

Typical Catalysed Properties. Mixed @ 23°C and 50% RH

Mix ratio A:B (by weight)100:100
Mixed Consistency mPa s2500
Potlife6 minutes
Cure/ Demould Time20 minutes