Plaster-like appearance
With maximised, plaster-like contrasts, our high-contrast resin allows significantly better detail visibility.
Short exposure time
A short exposure time gently treat the light and imaging unit of your dental 3D printer. The economic efficiency increases.
Very hard models
The models are extremely hard after the printing process and the post-exposure. This leads to perfect working properties of the prints.
High material reactivity
The high material reactivity shortens the exposure time by up to 50%.
Very low viscosity
The advantages of a low viscosity: faster printer travel, simpler cleaning and lower material consumption.
Finest details
Short exposure times, a high opacity and a high reactivity ensure that defined edges can be printed precisely and at least smallest details can be replicated.
The NYTE3D Model High-Contrast resin was developed especially for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm. You can freely decide if you use the material in a LCD printer or a DLP printer.
To fulfill all requirements of digital model making, we have cooperated with dental technicians and other experts. The result is a dental model material for printing crown models, bridge models, aligner models, prosthetic models, diagnostic models and implant models.
Technical data
| 3,5 % Flexural stress | 65,7 ± 3,4 MPa |
| Flexural strength | 71,2 ± 4,2 MPa |
| Flexural strain | 4,93 ± 0,13 % |
| Flexural modulus | 2484 ± 145 MPa |
| Shore hardness D | 90 ± 1 |
| Viscosity | 220 mPa·s |
| Wavelength range | 385-405nm |