Version=01


[General]
Name="VarseoSmile TriniQ Max 405"
Revision=1
Heater Temperature=30
IR Heater Temperature=30
Heater Enable=true
IR Heater Enable=true

Printer Classes=["MAX", "Ultra 405", "Max 2 405"];Printer Classes=[Pico, "Pico 2", PRO, "PRO UV405", "MAX UV405", MAX]

[Curing]
Light Intensity=6
;Support Exposure=100

Z=[8.46, 0.016]
Z=[11.28, 0.058]
Z=[14.1, 0.094]
Z=[16.92, 0.123]
Z=[19.74, 0.143]
Z=[22.56, 0.158]

;Target Cure Thickness = Build Layer Thickness * Multiplier + Offset
;Offset of between 0.06 and 0.10 give good results

Offset=0.000 		;0.000 ;for 50 micron layers
Z Compensation=0.25	;0.00
;B=0.24  M=0.08 bei 1mW // B=0.25 M=0.08 bei 7.5mW
Burn-In Layers=1
Burn-In Exposure=0.35
XY Compensation=0.00 ;405nm
Scale=[1.007, 1.007, 1.002]

[Delays]
Burn-In Wait Time (After Exposure)=2
Burn-In Wait Time (After Separation)=5
Normal Wait Time (After Exposure)=0.1

[:/MAX-Platform/General]
Printer Classes=["MAX", "Ultra 405", "Max 2 405"]

[:/MAX-Platform/Mechanics]
Separation Distance=10 ; mm
Separation Velocity= 2.475; mm/s
Approach Velocity= 4.3; mm/s
;Separation Detect Window= 10 ;
;Separation Detect Window Time=0.400
Separation Detect Hard Stop=1
Traverse Timeout Range=200
Motor Timeout=150
Separation Pressure Limit=300

[:/PRO-Platform/General]
Printer Classes=["PRO UV385", "PRO UV405"]
Slice Thickness Presets=[0.05, 0.075, 0.1]
Slice Thickness = 0.1

[:/PRO-Platform/Mechanics]
Separation Distance=12 ; mm
Separation Velocity= 5; mm/s
Approach Velocity= 10; mm/s
Slides Per Layer=0 ;
;Smart Slide Threshold=1000
;Smart Slide Lag=0.5


[Support]
Leveling=true
Leveling Height=2.0
Tallest=false
Tallest Height=0.0
Slope=35
Side Feature=2.0
Spacing=2.5
Strength=40
Torsion=0
Intersupport=true
Contact=0.5
Overshoot=0.5
MaximumWidth=2.3
Side Faces=20
AspectRatio=1.5