Otoflash and Accessories

Otoflash and Accessories

Description

Light-curing device for rapid and reliable light-curing of VarseoWax and VarseoSmile resins

  • Post-curing device for 3D prinitng - Post-curing is required to fully harden printed parts. (This unit is not for composite).
  • Two flashlight bulbs shining from below into the polymerization chamber and hence makes short resin light-curing times possible.
  • Wide wavelength field ensures very good resin hardening and hence achievement of the final physical characteristics of the printed objects.
  • Protective gas equipment prevents oxygen inhibition, guarantees completely adhesive-free surface curing and hence efficient reduction of the residual monomer content and biocompatibility.
  • Device can be used for photopolymerization of all materials that harden under light at wavelengths between 300 to 700 nm.

 Product Details:

Nominal voltage:100, 115, 230 VAC, 50/60
Power consumption:Approx. 250 W
Flash frequency:10 flashes a second
Size of the polymerisation spaceApprox. 120 × 120 × 50 mm
Spectral distribution:300 – 700 nm
Dimensions (L × W × H):Approx. 310 × 310 × 140 mm
Weight:Approx. 6 kg
Gas pressure:1.0 – 1.2 bar
Gas type:Nitrogen N 2 / 2.6
Gas flow:Approx. 10 l / min
 

Code Image Description Details
BG20349
Pressure Reducer For Gas Connection
Pressure Reducer For Gas Connection
BG20376
Otoflash Polymerisation Tray
Otoflash Polymerisation Tray
BG26465
Otoflash Light Cure Unit
Otoflash Light Cure Unit

Related Products